Free Ferris FW45 CC Series 5901893 Parts Manual PDF

Manuals
Brands
Ferris
Mower
FW45 CC Series
Parts Manual

Contents

52" Mower Deck Group - Housing, Covers, Spindles, and Blades
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above
52" Mower Deck Group - Rollers
Decal Group - Brand and Model
Decal Group - Safety and Operation
Deck Lift Group S/N: 4001694244 and below
Deck Lift Group S/N: 4001694245 and above
Electrical Group S/N: 4001694244 and below
Electrical Group S/N: 4001694245 and above
Electrical Schematic - Charging Circuit S/N: 4001694244 and below
Electrical Schematic - Charging Circuit S/N: 4001694245 and above
Electrical Schematic - Cranking Circuit S/N: 4001694244 and below
Electrical Schematic - Cranking Circuit S/N: 4001694245 and above
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and below
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and above
Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below
Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and below
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and above
Engine Deck Group
Engine Remote Oil Tank, Hoses, & Mount Group
Front Frame Group
Fuel Supply Hose and Evap Group (No Canister)
Fuel Tank and Mount Group
Handle Bar Group S/N: 4001694244 and below
Handle Bar Group S/N: 4001694245 and above
Hydraulic Group - Hoses and Loom
Hydraulic Group - Transaxle Selector Valve
Hydraulic Group S/N: 4001694244 and below
Hydraulic Group S/N: 4001694245 and above
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694244 and below
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694245 and above
Motion Control Group - Steering Levers S/N: 4001694244 and below
Motion Control Group - Steering Levers S/N: 4001694245 and above
Parking Brake Group S/N: 4001694244 and Below
Parking Brake Group S/N: 4001694245 and Above
Transaxle Drive Group
Transaxle SERVICE PARTS - 5108694 and 5108693
Wheel and Tire Group

Download

Free Ferris FW45 CC Series 5901893 Parts Manual PDF | Manualsnet (2)

Ferris ManualFerris Mower ManualFerris FW45 CC Series ManualFerris 5901893 ManualFerris Mower Parts Manual

Pages87

Year2023

Language(s)

1 of 87

Summary of Content for Ferris FW45 CC Series 5901893 Mower Parts Manual PDF

Page 1

Parts Manual Mfg. No: 5901893 FW45 CC Series with 52" Side Discharge Mower Deck (FW45CCBVE2852)

Page 2

Table Of Contents

Model Components Page 52" Mower Deck Group - Housing, Covers, Spindles, and Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 52" Mower Deck Group - Rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Decal Group - Brand and Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Decal Group - Safety and Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Deck Lift Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Deck Lift Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Electrical Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Electrical Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Electrical Schematic - Charging Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Electrical Schematic - Charging Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Electrical Schematic - Cranking Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Electrical Schematic - Cranking Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and below. . . . . . . . . . . . . . . 32 Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and above. . . . . . . . . . . . . . 34 Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . 40 Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . 42 Engine Deck Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Engine Remote Oil Tank, Hoses, & Mount Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Front Frame Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Fuel Supply Hose and Evap Group (No Canister). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Fuel Tank and Mount Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Handle Bar Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Handle Bar Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Hydraulic Group - Hoses and Loom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Hydraulic Group - Transaxle Selector Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Hydraulic Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Hydraulic Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694244 and 66 Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694245 and 68 Motion Control Group - Steering Levers S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Motion Control Group - Steering Levers S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Parking Brake Group S/N: 4001694244 and Below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Parking Brake Group S/N: 4001694245 and Above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Transaxle Drive Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Transaxle SERVICE PARTS - 5108694 and 5108693. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Wheel and Tire Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

N t F

R pro

d ct io

Page 3

52" Mower Deck Group - Housing, Covers, Spindles, and Blades Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 4

52" Mower Deck Group - Housing, Covers, Spindles, and Blades REF NO PART NO QTY DESCRIPTION

0010 5601106 1 DECK SHELL W/ DECALS, FW35-52 (5422046B) 0015 5100993 3 SPINDLE ASSM, CAST IRON 8.0 - 6-BOLT 0020 5025320X14 3 BOLT, 5/8-11 X 1-3/4 GD8 0030 5025477 3 WASHER, BLADE BOLT, 9/16" F436, CZ 0040 5101756S 1 BLADE, 18 X .25 X 2.5, 1 X 3.5 (SET OF THREE)

-(Refer to Note :*) 0080 5025145X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE, GD5, CZ 0090 5025392 3 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0120 5413400AA 1 NLA - WELD, MOUNT, DISCHARGE CHUTE - BLK 0130 5413499 1 CHUTE, RUBBER DISCHARGE (5104442) 0140 5413398AA 1 SUPPORT, DISCHARGE CHUTE - BLK 0160 5025394 21 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0164 5061300 1 ROD, MOUNT, CHUTE, 61, CZ 0165 5025155 8 WASHER, 5/16" SAE 0170 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 0210 5025011X6 7 BOLT, 5/16-18 X 3/4 GD5 0220 5022308 6 BODY CLIP, 5/16-18-7GA MATERIAL 0260 5412336B 1 GUARD, DECK, 52, LH - RED 0270 5412335B 1 GUARD, DECK, 52, RH - RED 0370 84003127 1 DEFLECTOR 0390 5025146X12 3 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ 0400 5025390X8 18 BOLT, 3/8-16 X 1, FLANGE, GD 5, CZ

Note : * Set of 3 blades.

Footnotes:

Not F or

Repro duct io

Page 5

52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 6

52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

0010 5103392 1 BELT, 5V, 147.40"EL, LRG ARAMID,WRPD, RC 0020 5104717 2 PULLEY, FLT IDLR, 6.0 X 1.0 X .50, CZ 0030 5104716 1 PULLEY,IDLER,BACKSIDE,NOSEAM 6.25ODX.5ID 0040 5101351 3 PULLEY, 5.926OB X .985ID, SINGLE B-SEC 0050 5412371A 1 WELD, TENSION ARM, CUTTER DECK - BLK 0080 5104172 1 SPACER, .505 X .75 X 2.085, CZ 0090 5025158 1 WASHER, 1/2 SAE 0100 5047142 1 SPACER, .52 X 1.25 X .70, PM, CZ 0110 5050407X10 3 KEY, 1/4" SQ. X 1-1/4 0130 5025017X36 1 BOLT, 1/2-13 X 4-1/2" GD5 YZ 0140 5025396 4 NUT, Hex Flange, Nylock, 1/2-13 0150 5025405 3 NUT, 3/4-16 Hex 0160 5104166 1 SPRING, EXT, 1.5ODX12.25X.234WIRE BLK 0210 5025017X20 3 BOLT, 1/2-13 X 2-1/2" GD5 CZ 0230 5105145 3 SHIELD, BEARING, 1/2 ID X 2-7/8 OD, CZ 0290 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0300 5025128 1 NUT, 3/8-16 Hex Large Serrated Flange 0310 5025406 3 WASHER, 3/4 BELLEVILLE CL/ZC 0320 5023497 1 EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ 0330 5102406 1 SPACER, .38 X 1.13 X .781 STEP, CZ 0360 7078243 2 BEARING, BALL, AXLE 0370 5103262 2 SPACER, IDLER ARM, 1/2, PM 0380 5025013X12 1 BOLT, 3/8-16 X 1-1/2" GD5 CZ 0390 5025165 1 WASHER, 3/8" Fender 0400 5046916 2 SPACER, .51 x 1.75 x .75

Not F or

epro duct io

Page 7

52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 8

52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

0010 5103392 1 BELT, 5V, 147.40"EL, LRG ARAMID,WRPD, RC 0020 5104717 2 PULLEY, FLT IDLR, 6.0 X 1.0 X .50, CZ 0030 5104716 1 PULLEY,IDLER,BACKSIDE,NOSEAM 6.25ODX.5ID 0040 5101351 3 PULLEY, 5.926OB X .985ID, SINGLE B-SEC 0050 5412371A 1 WELD, TENSION ARM, CUTTER DECK - BLK 0080 5104172 1 SPACER, .505 X .75 X 2.085, CZ 0090 5025158 1 WASHER, 1/2 SAE 0100 5047142 1 SPACER, .52 X 1.25 X .70, PM, CZ 0110 5050407X10 3 KEY, 1/4" SQ. X 1-1/4 0130 5025017X36 1 BOLT, 1/2-13 X 4-1/2" GD5 YZ 0140 5025396 5 NUT, Hex Flange, Nylock, 1/2-13 0150 5025405 3 NUT, 3/4-16 Hex 0160 5104166 1 SPRING, EXT, 1.5ODX12.25X.234WIRE BLK 0210 5025017X20 3 BOLT, 1/2-13 X 2-1/2" GD5 CZ 0230 5105145 3 SHIELD, BEARING, 1/2 ID X 2-7/8 OD, CZ 0290 5025394 1 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0300 5025089 1 NUT, 1/2-20 Hex Jam 0310 5025406 3 WASHER, 3/4 BELLEVILLE CL/ZC 0320 5105844 1 SPRING PULLER, 1/2-20, 5.00 0330 5102406 1 SPACER, .38 X 1.13 X .781 STEP, CZ 0360 7078243 2 BEARING, BALL, AXLE 0370 5103262 2 SPACER, IDLER ARM, 1/2, PM 0380 5025013X12 1 BOLT, 3/8-16 X 1-1/2" GD5 CZ 0390 5025165 1 WASHER, 3/8" Fender 0400 5046916 2 SPACER, .51 x 1.75 x .75

Not F or

epro duct io

Page 9

52" Mower Deck Group - Rollers Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 10

52" Mower Deck Group - Rollers REF NO PART NO QTY DESCRIPTION

0010 5025156 3 WASHER, 3/8 SAE 0020 5047027 1 SPACER, .51 X .75 X .56, PM, CZ 0030 5104675 1 SPACER, .38 X .50 X 2.50, CZ 0040 5025013X28 1 BOLT, 3/8-16 X 3-1/2" GD5 CZ 0050 1714760 1 WHEEL- 2.00 WIDE 3.88 DIA 0.531ID POLY 0060 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0070 5105755 1 PIN, ROLLER, CZ 0080 5020785 1 ROLLER, DECK 0090 5025013X8 2 BOLT, 3/8-16 X 1" GD5 CZ

Not F or R

epro duct io

Page 11

Decal Group - Brand and Model Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 12

Decal Group - Brand and Model REF NO PART NO QTY DESCRIPTION

1 5022812 1 DECAL, 52 2 5104767FS 1 DECAL, BRAND 3 5108862 1 DECAL, MODEL, W45 4 5107428 1 DECAL, FERRIS TEXT, 5"

Not F or R

epro duct io

Page 13

Decal Group - Safety and Operation Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 14

Decal Group - Safety and Operation REF NO PART NO QTY DESCRIPTION

1 7101665 2 DECAL, DANGER DO NOT OPERATE W/O DEFLECT 2 5100490 2 DECAL, PEDAL 3 5108757 1 DECAL, TRANSAXLE SELECTOR VALVE 4 5108832 1 DECAL, DASH PANEL, W45 5 5101291 1 DECAL, CUT HEIGHT, SPDD 6 5103665 1 DECAL, FIRE HAZARD, 3.25W X 3.0H 7 5104269 1 DECAL, SPANISH MANUAL, IGES, C-TICK 8 5104213 1 DECAL, BELT ROUTING, F/SW35 9 5104268 2 DECAL, TRANSAXLE RELEASE, WB 10 5102628 1 DECAL, PARKING BRAKE SYMBOLS 11 5104266 1 DECAL, CUT HEIGHT, WB, 1.5"-5" 12 ----- 1 LABEL, OIL INFORMATION

-(Models w/ Remote Oil Tank Only) 13 5106760 1 DECAL, MAIN SAFETY, SULKY

Not F or R

epro duct io

Page 15

Deck Lift Group S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 16

Deck Lift Group S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

1 5413900A 4 BRACKET, INNER TRUNION MNT - BLK 2 5413899A 4 BRACKET, OUTER TRUNION MNT - BLK 3 5104238 4 PIVOT, DECK LIFT TRUNION, GREASABLE 4 5109915FS 4 ADJUSTER, HEIGHT 5 5020095 4 GREASE FITTING, 1/4-28 Straight 6 1702779 2 JOINT-BALL .500-20 THD .500ID, CLR ZINC 7 5025281 5 WASHER, 5/8" SAE 8 5104209 2 ROD, DECK LIFT TIMING, 48-52 9 5025013X22 4 BOLT, 3/8-16 X 2-3/4" GD5 CZ 10 5025394 4 NUT, 3/8 - 16 HEX NYLOCK FLANGE 11 5021541 6 BUSHING, FLANGE 12 5100732 2 SPACER, .52 X 1.00 X 2.09 - SS 13 5025160 2 WASHER, 3/4 SAE 14 5102665 2 ROD, 1/2-20 X 5.50 TFL, CZ 15 5025156 8 WASHER, 3/8 SAE 16 5025394 8 NUT, 3/8 - 16 HEX NYLOCK FLANGE 17 5025013X12 8 BOLT, 3/8-16 X 1-1/2" GD5 CZ 18 5025396 6 NUT, Hex Flange, Nylock, 1/2-13 19 5102774A 1 DECK CRANK, SW30 - BLK 20 5102086 1 CAP, VINYL, 1.062 X 1.00 BLK 21 5025017X40 1 BOLT, 1/2-13 X 5" GD5 YZ 22 5021733 1 KNOB, PLASTIC, 1/2-13 23 5025203X10 5 PIN, COTTER, 1/8 X 1-1/4 24 5413896A 1 WELD, DECK LIFT LEVER, RH - BLK 25 5100548 2 WASHER, .390 X 1.50 X .109, YZ 26 5025443 2 BOLT, 3/8-16 X 3/4, PLT W/PATCH 27 5403925A 2 PLATE, PIVOT BLOCK SUPPORT - BLK 28 5413895A 1 WELD, DECK LIFT LEVER, LH - BLK 29 5061010 2 WASHER, FRICTION 30 5025017X26 2 BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, CZ (SV) 31 5025150 2 WASHER, 1/2" USSZ 32 5100731 2 ROLLER, DECK HEIGHT 33 5104220 1 ROD, DECK HEIGHT 34 5100634 4 PIVOT BLOCK, PLASTIC 35 5413894A 1 WELD, SHAFT, DECK LIFT, SW35 - BLK 36 5025089 2 NUT, 1/2-20 Hex Jam 37 5105392 4 WASHER, .515 X 1.00 X .25", CZ 38 5104267 2 BALL JOINT, 1/2-20, RH, MALE, METAL RACE 39 5025158 6 WASHER, 1/2 SAE 40 5025017X16 4 BOLT, 1/2-13 X 2" GD5 CZ

Not F or R

epro duct io

Page 17

Deck Lift Group S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 18

Deck Lift Group S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

1 5413900AA 4 BRACKET, INNER TRUNION MNT - BLK 2 5413899AA 4 BRACKET, OUTER TRUNION MNT - BLK 3 5104238 4 PIVOT, DECK LIFT TRUNION, GREASABLE 4 5109915FS 4 ADJUSTER, HEIGHT 5 5020095 4 GREASE FITTING, 1/4-28 Straight 6 1702779 2 JOINT-BALL .500-20 THD .500ID, CLR ZINC 7 5025281 5 WASHER, 5/8" SAE 8 5104209 2 ROD, DECK LIFT TIMING, 48-52 9 5025013X22 4 BOLT, 3/8-16 X 2-3/4" GD5 CZ 10 5025394 4 NUT, 3/8 - 16 HEX NYLOCK FLANGE 11 5021541 6 BUSHING, FLANGE 12 5100732 2 SPACER, .52 X 1.00 X 2.09 - SS 13 5025162 1 WASHER-1.00 HYDRO CUT 14 5102665 2 ROD, 1/2-20 X 5.50 TFL, CZ 15 5025156 8 WASHER, 3/8 SAE 16 5025394 8 NUT, 3/8 - 16 HEX NYLOCK FLANGE 17 5025013X12 8 BOLT, 3/8-16 X 1-1/2" GD5 CZ 18 5025396 6 NUT, Hex Flange, Nylock, 1/2-13 19 5109449 1 CRANK, HANDLE, W45 20 5102086 1 CAP, VINYL, 1.062 X 1.00 BLK 21 5025017X48 1 BOLT, 1/2-13 X 6" GD5 YZ 22 5021733 1 KNOB, PLASTIC, 1/2-13 23 5025203X10 5 PIN, COTTER, 1/8 X 1-1/4 24 5413896AA 1 NLA - WELD, DECK LIFT LEVER, RH - BLK 25 5100548 2 WASHER, .390 X 1.50 X .109, YZ 26 5025443 2 BOLT, 3/8-16 X 3/4, PLT W/PATCH 27 5403925AA 2 PLATE, PIVOT BLOCK SUPPORT - BLK 28 5413895AA 1 WELD, DECK LIFT LEVER, LH - BLK 29 5061010 2 WASHER, FRICTION 30 5025017X26 2 BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, CZ (SV) 31 5025150 2 WASHER, 1/2" USSZ 32 5100731 2 ROLLER, DECK HEIGHT 33 5104220 1 ROD, DECK HEIGHT 34 5100634 4 PIVOT BLOCK, PLASTIC 35 5413894AA 1 WELD, SHAFT, DECK LIFT, SW35 - BLK 36 5025089 6 NUT, 1/2-20 Hex Jam 37 5105392 4 WASHER, .515 X 1.00 X .25", CZ 38 5104267 2 BALL JOINT, 1/2-20, RH, MALE, METAL RACE 39 5025158 6 WASHER, 1/2 SAE 40 5025017X16 4 BOLT, 1/2-13 X 2" GD5 CZ 41 5107543 1 SPRING, FORWARD RETURN, FW15 42 5109482 1 SNAP RING, EXTERNAL, 15/16" SHAFT

Not F or R

epro duct io

Page 19

Electrical Group S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 20

Electrical Group S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

0010 5104697 1 PTO SWITCH, MOMENTARY, SMALL KNOB 0020 84008510 1 HOURMETER 0030 5020927 1 SWITCH, IGNITION, 6 POST 0040 5021766 1 RELAY, 12 VOLT, 40 AMP 0050 5101280 1 SWITCH, PLUNGER, NO/NC SNAP-IN, LOW PROFILE 0060 5100688 1 BATTERY BOX, W/ DRAIN HOLE 0070 5415329AA 1 WELD, MOUNT- BATTERY, W35 - BLK 0080 ----- 1 BATTERY, 11U1L, 350 CCA 0090 5105301 1 BATTERY CABLE,NEG, 42, 1/4-5/16 0100 5105300 1 BATTERY CABLE, POS, 47, 1/4-5/16 0110 5021670 1 STRAP, RUBBER 0120 5025271 3 NUT, Hex, Nylon Lock, #10-24 0130 5025270 2 SCREW, #10-24 X 1 RS, CZ 0140 5025271 2 NUT, Hex, Nylon Lock, #10-24 0150 5025179X6 3 SCREW, #10-24 X 3/4" ROUND PHILLIPS 0160 5021029 8 TIE, SELF-LOCKING, 12" 0170 5050927X39 1 WIRE LOOM, 3/8 ID X 39 IN 0180 5025010X6 2 BOLT, 1/4"-20 X 3/4" GD5 YZ 0190 5025154 3 WASHER, 1/4 SAE 0220 5025126 2 NUT, 1/4-20 HEX SERR. FLANGE 0230 5025179X4 1 SCREW, #10-24 X 1/2" ROUND PHILLIPS 0240 5025249 1 BOLT, M8-1.25 X 20 MM GD 8.8 0250 5025355 2 NUT, M8-1.25 Hex Serrated Flange 0260 5025013X8 2 BOLT, 3/8-16 X 1" GD5 CZ 0270 5025156 2 WASHER, 3/8 SAE 0280 5025394 2 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0300 5103809 1 LIGHT, INDICATOR, PANEL, LED, RED 0310 5108764 1 SWITCH, NC/NC/NO, 6300-001, DELTA 0320 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

-(Refer to note: *) 0330 5101589 1 SWITCH, PLUNGER, NO, SINGLE POLE, SNAP-IN 0350 5420445AA 1 CLAMP, SWITCH, 3 POLE RAIL MNT - BLK 0360 5023499 2 WASHER, #10 SAE 1001 5025179X6 2 SCREW, #10-24 X 3/4" ROUND PHILLIPS 1002 1717050 1 SWITCH, PLUNGER, N.O./N.C. 1003 5420940AA 1 PLATE, SWITCH MOUNT, W45 - BLK 1004 5025271 2 NUT, Hex, Nylon Lock, #10-24

Note: *If replacing the wire harness you must also order items #1001, 1002, 1003, and 1004.

Footnotes:

Not F or

Repro duct io

Page 21

Electrical Group S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 22

Electrical Group S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

0010 5050927X39 1 WIRE LOOM, 3/8 ID X 39 IN 0020 5104697 1 PTO SWITCH, MOMENTARY, SMALL KNOB 0030 84008510 1 HOURMETER 0040 5020927 1 SWITCH, IGNITION, 6 POST 0050 5021766 1 RELAY, 12 VOLT, 40 AMP 0060 5101280 1 SWITCH, PLUNGER, NO/NC SNAP-IN, LOW PROFILE 0070 5100688 1 BATTERY BOX, W/ DRAIN HOLE 0090 ----- 1 BATTERY, 11U1L, 350 CCA 0100 5105301 1 BATTERY CABLE,NEG, 42, 1/4-5/16 0110 5105300 1 BATTERY CABLE, POS, 47, 1/4-5/16 0120 5021670 1 STRAP, RUBBER 0130 5025271 6 NUT, Hex, Nylon Lock, #10-24 0140 5025270 2 SCREW, #10-24 X 1 RS, CZ 0150 5021029 8 TIE, SELF-LOCKING, 12" 0160 5025010X6 1 BOLT, 1/4"-20 X 3/4" GD5 YZ 0170 5025154 3 WASHER, 1/4 SAE 0200 5025126 2 NUT, 1/4-20 HEX SERR. FLANGE 0220 5025179X6 3 SCREW, #10-24 X 3/4" ROUND PHILLIPS 0230 5025179X4 1 SCREW, #10-24 X 1/2" ROUND PHILLIPS 0240 5025249 1 BOLT, M8-1.25 X 20 MM GD 8.8 0250 5025355 2 NUT, M8-1.25 Hex Serrated Flange 0260 5025013X8 3 BOLT, 3/8-16 X 1" GD5 CZ 0270 5025156 3 WASHER, 3/8 SAE 0280 5025394 5 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0300 5103809 1 LIGHT, INDICATOR, PANEL, LED, RED 0310 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW 0320 5021451 1 SWITCH, PLUNGER, N.O., BOLT-ON 0330 1717050 1 SWITCH, PLUNGER, N.O./N.C. 0400 80004566 2 BOLT,3/8-16X1.00,RD SH SQ NK,GR 5,ZC/CL 0410 5421220AA 1 WELD, MNT BATTERY LOWER, OG, W45 - BLK 0420 5421221AA 1 WELD, MNT BATTERY UPPER, OG, W45 - BLK

Not F or R

epro duct io

Page 23

Electrical Schematic - Charging Circuit S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 24

Electrical Schematic - Charging Circuit S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 25

Electrical Schematic - Charging Circuit S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 26

Electrical Schematic - Charging Circuit S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 27

Electrical Schematic - Cranking Circuit S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 28

Electrical Schematic - Cranking Circuit S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 29

Electrical Schematic - Cranking Circuit S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 30

Electrical Schematic - Cranking Circuit S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 31

Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 32

Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 33

Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 34

Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 35

Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 36

Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 37

Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 38

Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

5108762 5108762 1 HARNESS, W45 WIRING W/ BRAKE SW

Not F or R

epro duct io

Page 39

Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 40

Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and REF NO PART NO QTY DESCRIPTION

1 5412326A 1 PLATE, CLUTCH ANCHOR - BLK 2 5102865 1 BOLT, CRANKSHAFT,7/16-20X2-3/4, GD8 3 5025585 2 BELLEVILLE WASHER 1.1875 X .442 X .089 4 5104236 1 PULLEY, CRANKSHAFT, 1.125ID X 4.50OD, OS 5 5047033 1 SPACER, 1.13 X 1.75 X 1.03, CZ 6 5105090 1 CLUTCH,WARNER,200 'lbs,1.13 7 5104355 1 MUFFLER, 26/28, B&S VANG, EFI TWR/WALK 8 ----- 1 ENGINE, B&S, EFI, OIL GUARD (49E877-0008-G1)

-(S/N: 4001858852 and below) 8 ----- 1 BRIGGS & STRATTON ENGINE, 49E877-0021-G1

-(S/N: 4001858853 and above) 9 5415276A 1 PLATE, MUFFLER SUPPORT, LH, W35 - BLK 10 5415277A 1 PLATE, MUFFLER SUPPORT, RH, W35 - BLK 11 5412353AA 1 WELD, MUFFLER GUARD - BLK 12 5050407X8 1 KEY, 1/4 SQ X 1 13 273485 2 GASKET, EXHAUST 14 5023217 4 WASHER, 5/16 LIGHT LOCK 15 5025032 4 NUT, 5/16-18 HEX 16 5025025X14 3 BOLT, 5/16-24 X 1-3/4, GD8, PHOS 17 5025025X12 1 BOLT, 5/16-24 X 1-1/2, GD8, PHOS 18 5025155 6 WASHER, 5/16" SAE 19 5025188 4 WASHER, 5/16 INT. TOOTH LOCK 20 5025616 4 NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS 21 5025145X8 2 BOLT, 5/16-18 X 1, CARRIAGE 22 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE 23 5025011X8 10 BOLT, 5/16-18 X 1 GD5 CZ 24 5025292 4 WASHER, 5/16 F436 FLAT 25 80003675 2 NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL 26 5025013X10 6 BOLT, 3/8-16 X 1-1/4" GD5 CZ 27 5025156 6 WASHER, 3/8 SAE 28 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE

Not F or R

epro duct io

Page 41

Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 42

Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and REF NO PART NO QTY DESCRIPTION

-(S/N: 4001858852 and below) 8 ----- 1 BRIGGS & STRATTON ENGINE, 49E877-0021-G1

-(S/N: 4001858853 and above) 9 5415276A 1 PLATE, MUFFLER SUPPORT, LH, W35 - BLK 10 5415277A 1 PLATE, MUFFLER SUPPORT, RH, W35 - BLK 11 5421108AA 1 WELD, MUFFLER/02, GUARD, W45 - BLK 12 5050407X8 1 KEY, 1/4 SQ X 1 13 273485 2 GASKET, EXHAUST 14 5023217 4 WASHER, 5/16 LIGHT LOCK 15 5025032 4 NUT, 5/16-18 HEX 16 5025025X14 3 BOLT, 5/16-24 X 1-3/4, GD8, PHOS 17 5025025X12 1 BOLT, 5/16-24 X 1-1/2, GD8, PHOS 18 5025155 6 WASHER, 5/16" SAE 19 5025188 4 WASHER, 5/16 INT. TOOTH LOCK 20 5025616 4 NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS 21 5025145X8 2 BOLT, 5/16-18 X 1, CARRIAGE 22 5025392 4 NUT, 5/16-18 HEX NYLOCK FLANGE 23 5025011X8 10 BOLT, 5/16-18 X 1 GD5 CZ 24 5025292 4 WASHER, 5/16 F436 FLAT 25 80003675 2 NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL 26 5025013X10 6 BOLT, 3/8-16 X 1-1/4" GD5 CZ 27 5025156 6 WASHER, 3/8 SAE 28 5025394 6 NUT, 3/8-16 HEX NYLOCK FLANGE

Not F or R

epro duct io

Page 43

Engine Deck Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 44

Engine Deck Group REF NO PART NO QTY DESCRIPTION

0010 5102677 2 GROMMET, 1-1/2" ID FOR 1/4" METAL 0020 5412030AA 1 PLATE, FAN GUARD - BLK 0030 5025145X8 2 BOLT, 5/16-18 X 1, CARRIAGE, GD5, CZ 0040 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0050 5025498 2 5/16" PUSH-ON NUT RETAINER, STL, CZ 0060 5103944 1 GROMMET, 7/8"ID, 1/4" THICK STK 0070 5420466AA 2 PLATE, TRANS PROTECTOR, W45 - BLK 0080 80004497 4 BOLT,3/8-16X1.000,RND HD CRRG,ZINC/CLEAR 0090 5025394 8 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0100 80005327 8 RETAINER,3/8,PUSHNUT,ZINC/CLEAR 0110 5025146X12 4 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ 0120 5108724 1 FLAP, RUBBER, 3/16 X 6.75 X 26.00 0130 5420312B 1 WELD, ENGINE DECK, W45 - RED 0140 5420214AA 1 WELD, LOWER FLAP MOUNT - BLK 0150 5420213AA 2 WELD, UPPER FLAP MOUNT - BLK 0160 5108918 1 ROD, 5/16 X 26.375, CZ 0180 5025155 2 WASHER, 5/16" SAE 0190 5025391 5 NUT, 1/4-20 Hex Nylock Flange 0200 5025010X6 5 BOLT, 1/4"-20 X 3/4" GD5 YZ 0210 5025288 5 WASHER, 1/4" Fender 0220 80002736 2 PIN, 3/32 X 0.750, COT, ZINC/CLEAR

Not F or R

epro duct io

Page 45

Engine Remote Oil Tank, Hoses, & Mount Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 46

Engine Remote Oil Tank, Hoses, & Mount Group REF NO PART NO QTY DESCRIPTION

1 5420397AA 1 PLATE, LOWER TANK MOUNT, W45 - BLK 2 5415327A 1 TANK MOUNT, TOP, W35 - BLK 3 5415916A 1 WELD, TANK GUARD, W35 - BLK 4 595945 1 TANK, Oil

-(Refer to Note: *)(S/N: 4001858852 and below) 4 84006647 1 TANK, OIL

-(Refer to Note: *)(S/N: 4001858853 and above) 5 197546 2 MNT, VBRTN, RBBR 6 5105177 1 VALVE, OIL DRAIN, M16X1.5 TO 1/2" 7 5105318 1 NUT, HEX, M16-1.5, DAPCO 4071 8 5105317 1 OIL DRAIN CAP, OIL GUARD, DAPCO 4692 9 5105492 1 HOSE, Formed, Oil Guard 10 ----- 0 Refer to: Electrical Group 11 5023131 3 MOUNT, ISO, BOTTOM, RAD 5000Z-DIESEL 12 5025165 3 WASHER, 3/8" Fender 13 5025013X14 3 BOLT, 3/8-16 X 1-3/4" GD5 CZ 14 5025394 5 NUT, 3/8 - 16 HEX NYLOCK FLANGE 15 5025392 12 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 16 5021392 2 CLAMP, #6 HOSE, STAINLESS 18 ----- 1 TIE, Cable, Yellow 7.6" 19 5050862X8 1 WIRE LOOM, 3/4 ID X 8.00" LG 20 84006650 1 HOSE, OIL SUPPLY

-(Refer to Note: *)(S/N: 4001858852 and below) 20 84006649 1 HOSE, OIL SUPPLY

-(Refer to Note: *)(S/N: 4001858853 and above) 21 595943 1 HOSE, Oil Vent

-(Refer to Note: *) 22 84006661 1 HOSE, OIL SCAVENGE

-(Refer to Note: *) 23 5025145X8 2 BOLT, 5/16-18 X 1, CARRIAGE, GD5, CZ 24 5025498 2 5/16" PUSH-ON NUT RETAINER, STL, CZ 25 5025156 2 WASHER, 3/8 SAE 26 5025013X10 2 BOLT, 3/8-16 X 1-1/4" GD5 CZ 27 5025155 12 WASHER, 5/16" SAE 28 5025011X8 10 BOLT, 5/16-18 X 1" GRD5 YZ 29 84007094 1 FILTER, OIL 30 595931 1 CAP, Oil Fill 31 595934 1 DIPSTICK 32 5105281 1 OIL, 15W-50, SYNTHETIC, CASE X 12- 1QT 33 5105282 1 OIL, 15W-50, SYNTHETIC, CASE X 4- 5QT

Note: *Order Oil Guard replacement parts from your Authorized Briggs & Stratton Engine Service Provider

Footnotes:

Not F or

Repro duct io

Page 47

Front Frame Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 48

Front Frame Group REF NO PART NO QTY DESCRIPTION

0010 5422126B 1 WELD, FRONT FRAME, W45, 478/52 - RED 0010-10 5020883 2 CUP, BEARING (SV)

-(SV) 0020 5025396 6 NUT, Hex Flange, Nylock, 1/2-13 0030 5025017X10 6 BOLT, 1/2-13 X 1-1/4 GD5 CZ 0040 5025158 6 WASHER, 1/2 SAE 0050 5401759B 2 WELD., FRONT CASTER YOKES - RED 0060 5020884 4 BEARING, TAPERED ROLLER, 1" 0070 5021072 2 SEAL, GREASE 0080 5025449 4 WASHER, BELLEVILLE - 1.500 X .755 0090 5025448 2 NUT, 3/4-16, HEX JAM NYLON LOCK 0100 5020095 2 GREASE FITTING, 1/4-28 Straight 0110 5025457 2 BOLT, 1/4-28 X 1/2, GD5 YZ 0120 5109845 2 CAP, GREASE, LOW PROFILE 0130 5420467B 1 PLATE, FRONT GUARD, W45 - RED 0150 5022308 4 BODY CLIP, 5/16-18-7GA MATERIAL 0160 5025011X8 4 BOLT, 5/16-18 X 1" GRD5 YZ 0170 5025337 4 WASHER, 5/16" USS

Not F or R

epro duct io

Page 49

Fuel Supply Hose and Evap Group (No Canister) Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 50

Fuel Supply Hose and Evap Group (No Canister) REF NO PART NO QTY DESCRIPTION

0010 5050831X29P5 1 HOSE, 1/4" FUEL, 29.50" 0020 93807 2 CLAMP, Hose 0040 7700552X15P5 1 HOSE, VAPOR, 5MM ID, 15.50 LG 0050 7700552X20P5 1 HOSE, VAPOR, 5MM ID, 20.50 LG 0130 5103062 1 FITTING, 3/16" TEE, BARB TYPE, HDPE 0140 7700552X4P5 1 HOSE, VAPOR, 5MM ID, 4.50 LG 0150 80025019 1 FILTER, FUEL 0160 5021030 2 TIE, SELF-LOCKING, 6" 1000 5021178X3 1 FUEL FILTER (SV)

-(SV)

Not F or R

epro duct io

Page 51

Fuel Tank and Mount Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 52

Fuel Tank and Mount Group REF NO PART NO QTY DESCRIPTION

0010 5102833 1 TANK, 4.625 GAL, W DROP TUBE/VENT 0010-10 5102833X1 1 GROMMET

-(Grommet for fuel tank 5102833) 0020 5108752 1 FUEL CAP, 3.5", MANAGED VENT OUT, 12" RT 0030 5025013X8 5 BOLT, 3/8-16 X 1" GD5 CZ 0040 5025156 5 WASHER, 3/8 SAE 0050 5025394 5 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0060 5403445AA 2 STRAP, FUEL TANK - SNP PRO DDS - BLK 0070 5025010X10 2 BOLT, 1/4-20 X 1-1/4 GD5 CZ 0080 5025391 2 NUT, 1/4-20 Hex Nylock Flange 0090 5025154 2 WASHER, 1/4 SAE 0100 5100810 2 PAD, RUBBER MOUNT 0110 5021029 1 TIE, SELF-LOCKING, 12" 0120 5413950AA 1 WELD, FUEL TANK, MOUNT, LOWER, W35 - BLK 0130 5420158AA 1 WELD, TANK MOUNT, W45 - BLK 0140 5025127 1 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 0150 5025055X16 1 BOLT, 5/16-18 X 2 GD5 TFL, CZ

Not F or R

epro duct io

Page 53

Handle Bar Group S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 54

Handle Bar Group S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

0010 5104659 2 GRIP, FOAM, .940" X 4.62" X .187" 0020 5025013X8 6 BOLT, 3/8-16 X 1" GD5 CZ 0030 5025293 6 WASHER, 3/8" GR. 9 FLAT 0040 5025394 6 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0060 5025011X8 4 BOLT, 5/16-18 X 1" GRD5 YZ 0070 5022665 4 BODY CLIP, 1/4-20 X 1/2" DEEP

-(For securing the oil cooler mount.) 0080 5025010X6 2 BOLT, 1/4"-20 X 3/4" GD5 YZ

-(For securing the throttle control.) 0090 5025154 2 WASHER, 1/4 SAE

-(For securing the throttle control.) 0100 5025391 2 NUT, 1/4-20 Hex Nylock Flange

-(For securing the throttle control.) 0110 5420443B 1 WELD, HANDLEBAR, W45 CC - RED 0120 5419312AA 1 BAR, SULKY GUARD, W25-W35 - BLK 0130 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0140 5025292 2 WASHER, 5/16 GRADE 9, FLAT 0150 5102542 1 GROMMET, 5/8 ID X 1/8 MATERIAL 0160 5100184 1 CABLE, CHOKE CONTROL, 43.5"

-(Kawasaki powered models only) 0170 5104657 1 CABLE, THROTTLE, 43" DETENTED

Not F or R

epro duct io

Page 55

Handle Bar Group S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 56

Handle Bar Group S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

-(For securing the oil cooler mount.) 0080 5025010X6 2 BOLT, 1/4"-20 X 3/4" GD5 YZ

-(For securing the throttle control.) 0090 5025154 2 WASHER, 1/4 SAE

-(For securing the throttle control.) 0100 5025391 2 NUT, 1/4-20 Hex Nylock Flange

-(For securing the throttle control.) 0110 5421015B 1 WELD, HANDLE BAR, CC, W45 - RED 0120 5419312AA 1 BAR, SULKY GUARD, W25-W35 - BLK 0130 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0140 5025292 2 WASHER, 5/16 GRADE 9, FLAT 0160 5100184 1 CABLE, CHOKE CONTROL, 43.5"

-(Kawasaki powered models only) 0170 5104657 1 CABLE, THROTTLE, 43" DETENTED 0180 5022649 1 BODY CLIP, 3/8-16 X .688" DEEP

Not F or R

epro duct io

Page 57

Hydraulic Group - Hoses and Loom Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 58

Hydraulic Group - Hoses and Loom REF NO PART NO QTY DESCRIPTION

0001 5050860X32 1 HOSE, 3/8" PUSH-LOCK, 32.00" 0110 5025474 4 CLAMP, HOSE, .75 FREE DIA. 0160 5050857X24 2 HOSE, 1/2" PUSH-ON, 24.00" 0170 5050862X20 2 WIRE LOOM, 3/4 ID X 20 IN 0180 5100772 8 TIE, SELF-LOCKING, 15" 0230 5023268 4 CLAMP, Hose 0290 5108746 2 FITTING, TEE, HOSE, 3/8-3/8-1/4 0370 5108540X42 1 HOSE, 3/8"" PUSH-LOCK, BLUE 42.00 0380 5108541X15P5 1 HOSE, 3/8" PUSH-LOCK, GREEN 15.50" 0390 5108541X23P5 1 HOSE, 3/8" PUSH-LOCK, GREEN 23.50" 0400 5108539X34P5 1 HOSE, 3/8" PUSH-LOCK, RED 34.50 0410 5108747X9 1 HOSE, 1/4" PUSH-LOCK, GREEN, 9.00" 0420 5050869X9 1 HOSE, 1/4" PUSH-LOCK, 9.00" 0430 5050860X14P5 1 HOSE, 3/8 PUSH LOCK, 14.50" 0450 5050861X40 1 WIRE LOOM, 5/8 ID X 40 IN 0460 5050861X15 1 WIRE LOOM, 5/8" ID. 15" LONG 0470 5050861X22 1 WIRE LOOM, 5/8 ID X 22 IN 0480 5050861X32 1 WIRE LOOM 5/8 ID X 32 IN 0490 5050861X13 1 WIRE LOOM 5/8 ID X 13 IN 0500 5050861X30 1 WIRE LOOM 5/8 ID X 30 IN 0530 5108736 8 CLAMP, HOSE, 5/8", FI TYPE 0540 93807 4 CLAMP, Hose 1000 ----- 1 Refer to: Hydraulic Group

Not F or R

epro duct io

Page 59

Hydraulic Group - Transaxle Selector Valve Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 60

Hydraulic Group - Transaxle Selector Valve REF NO PART NO QTY DESCRIPTION

0140 5025154 1 WASHER, 1/4 SAE 0150 5025391 3 NUT, 1/4-20 Hex Nylock Flange 0250 847378 1 CAP, DUST 0260 5023358 1 VALVE, FUEL STRAIGHT, OUTLET 0270 5022205 1 EYE BOLT, 1/4-20 X 2.5, 1THRD, .5EYE,CZ 0280 5108754 1 SPRING, COMP, .261 ID X .5 OD X 1" LG 0300 5108765 1 CLAMP, HOSE, VALVE BOOT 0310 1960252 2 BOLT-RD HD SH SQ NK 1/4-20X0. 625 G5 BLK 0350 5420417AA 1 PLATE, PURGE VALVE MOUNT - BLK

Not F or R

epro duct io

Page 61

Hydraulic Group S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 62

Hydraulic Group S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

0010 5108694 1 TRANSAXLE, ZT3400, Z9-YMFE-SL5C-1UXX 0020 5108693 1 TRANSAXLE, ZT3400, Z9-WMFE-SL5B-1UXX 0030 5025392 8 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0040 5025011X22 4 BOLT, 5/16-18 X 2-3/4, GD 5, YZ 0050 5025145X18 4 BOLT, 5/16-18 X 2-1/4, CARRIAGE, GD5, CZ 0060 5025155 4 WASHER, 5/16" SAE 0070 5104532 2 ROD, HYDRO RELEASE, WALKS 0080 5020047 2 COLLAR, 5/16" Set 0090 5022481 2 COLLAR, Set, 1/4" 0100 5100473 2 RESERVOIR, HYDRO OIL, 350 ML 0110 5025474 4 CLAMP, HOSE, .75 FREE DIA. 0130 5025010X6 8 BOLT, 1/4"-20 X 3/4" GD5 YZ 0140 5025154 15 WASHER, 1/4 SAE 0150 5025391 13 NUT, 1/4-20 Hex Nylock Flange 0160 5050857X24 2 HOSE, 1/2" PUSH-ON, 24.00" 0170 5050862X20 2 WIRE LOOM, 3/4 ID X 20 IN 0190 5103687 2 FITTING, #6 O-RING 1/2 HOSE BARB, STRAIGHT 0200 5101721 2 OIL COOLER, .75 X 11.0 X 24 PLATES 0210 5108782 2 FITTING, 90 DEG, 3/8"HOSE-9/16-18 O-RING 0220 5108783 2 FITTING, 25 DEG, 3/8"HOSE-9/16-18 O-RING 0320 5101215 4 SPACER, .26 X .38 X 1.250, YZ 0330 5025010X16 4 BOLT, 1/4-20 X 2, GD5 0340 5420446AA 1 PLATE, COOLER MOUNT, W45 - BLK 0520 5023263 1 CLAMP, VINYL INSULATED, 1.75 0550 5022665 4 BODY CLIP, 1/4-20 X 1/2" DEEP

Not F or R

epro duct io

Page 63

Hydraulic Group S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 64

Hydraulic Group S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

Not F or R

epro duct io

Page 65

Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 66

Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: REF NO PART NO QTY DESCRIPTION

0010 5412891AA 1 WELD, SPEED CONTROL, SW35 - BLK 0020 5420617AA 1 WELD, SPEED BAR, W45, CC - BLK 0030 5025010X6 9 BOLT, 1/4"-20 X 3/4" GD5 YZ 0040 ----- 2 SCREW-TRUSS HD TORX DR 1/4-20X0.750 ZC/C 0050 5025391 17 NUT, 1/4-20 Hex Nylock Flange 0060 5047199 3 SPACER, .38 x .50 x .75 0070 5101640 1 SPACER, .38 X .50 X .50, YZ 0080 5021683 3 BALL JOINT, 3/8-24 FEMALE 0090 5022392 1 BALL JOINT, 3/8-24 LH, Female 0110 5025394 9 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0130 5104164 1 ROD, 3/8-24, 19.00, LH-RH CZ 0220 5025288 1 WASHER, 1/4" Fender 0230 5101274 1 SPACER, .26 X .50 X 1.00 YZ 0240 5409272 1 PLATE, FRICTION CONTROL, SS 0250 5104176 2 PAD, T-712 FRICTION MATERIAL 0260 5025164 1 WASHER, 5/16" Fender 0270 5104221 1 SPRING, COMP, .40 X .60 X 2.25, BLACK 0290 5414516AA 1 WELD, OPC ROD, WALKBEHIND - BLK 0300 5010546 2 COLLAR, 3/8" Set 0310 84007748 2 CLEVIS 0320 7090095 2 HN, 1/4F GR5 YZ 0330 5101242 2 ROD, OPC LINK, SNP PRO WB 0340 5104201AA 1 FLAP, OPS - BLK 0350 5104202AA 1 FLAP, OPS - BLK 0360 5101215 2 SPACER, .26 X .38 X 1.250, YZ 0370 5025010X14 2 BOLT, 1/4 X 20 X 1-3/4 GD5 YZ 0520 5025203X10 4 PIN, COTTER, 1/8 X 1-1/4 0530 5104270 2 BEARING, 5/8" FLANGED, PLASTIC BALL 0540 5025154 12 WASHER, 1/4 SAE 0550 5104262 2 PEDAL, Rubber 0620 5025212X7 2 PIN, CLEVIS, 1/4 X 7/8, PLATED 0640 5025035 7 NUT, 3/8-24 HEX (SV) 0650 5025317 1 NUT, 3/8-24 Hex, LH 0660 5025013X14 1 BOLT, 3/8-16 X 1-3/4" GD5 CZ 0670 ----- 2 HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR 0720 5025010X16 1 BOLT, 1/4-20 X 2, GD5 0730 5025155 2 WASHER, 5/16" SAE 0740 5025155 1 WASHER, 5/16" SAE 0750 703429 1 NUT, Wing, 5/16-18 0770 5420287AA 1 WELD, FOOT PEDAL, W45 - BLK 0780 5420222AA 1 PLATE, SWITCH MOUNT, W45 - BLK

Not F or R

epro duct io

Page 67

Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 68

Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: REF NO PART NO QTY DESCRIPTION

0020 5420617AA 1 WELD, SPEED BAR, W45, CC - BLK 0030 5025010X6 3 BOLT, 1/4"-20 X 3/4" GD5 YZ 0050 5025391 14 NUT, 1/4-20 Hex Nylock Flange 0060 5047199 3 SPACER, .38 x .50 x .75 0070 5101640 1 SPACER, .38 X .50 X .50, YZ 0080 5021683 3 BALL JOINT, 3/8-24 FEMALE 0090 5022392 1 BALL JOINT, 3/8-24 LH, Female 0110 5025394 7 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0130 5104164 1 ROD, 3/8-24, 19.00, LH-RH CZ 0220 5025288 1 WASHER, 1/4" Fender 0230 5101274 1 SPACER, .26 X .50 X 1.00 YZ 0240 5409272 1 PLATE, FRICTION CONTROL, SS 0250 5104176 2 PAD, T-712 FRICTION MATERIAL 0260 5025164 1 WASHER, 5/16" Fender 0270 5104221 1 SPRING, COMP, .40 X .60 X 2.25, BLACK 0290 5414516AA 1 WELD, OPC ROD, WALKBEHIND - BLK 0300 5010546 2 COLLAR, 3/8" Set 0310 84007748 2 CLEVIS 0320 7090095 2 HN, 1/4F GR5 YZ 0330 5101242 2 ROD, OPC LINK, SNP PRO WB 0340 5104201AA 1 FLAP, OPS - BLK 0350 5104202AA 1 FLAP, OPS - BLK 0360 5101215 2 SPACER, .26 X .38 X 1.250, YZ 0370 5025010X14 2 BOLT, 1/4 X 20 X 1-3/4 GD5 YZ 0520 5025203X10 4 PIN, COTTER, 1/8 X 1-1/4 0530 5104270 2 BEARING, 5/8" FLANGED, PLASTIC BALL 0540 5025154 8 WASHER, 1/4 SAE 0620 5025212X7 2 PIN, CLEVIS, 1/4 X 7/8, PLATED 0640 5025035 9 NUT, 3/8-24 HEX (SV) 0650 5025317 1 NUT, 3/8-24 Hex, LH 0660 80003522 1 HHCS, 3/8-16 X 2.00, GR5, ZINC/CLEAR 0670 ----- 8 HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR 0720 5025010X16 1 BOLT, 1/4-20 X 2, GD5 0750 703429 1 NUT, Wing, 5/16-18 0770 5420287AA 1 WELD, FOOT PEDAL, W45 - BLK 5070 5101123 2 BEARING, 1/2 FLANGED, PLASTIC BALL 5100 5421102AA 1 WELD, SPEED CONTROL PIVOT, W45 - BLK 5110 5420940AA 1 PLATE, SWITCH MOUNT, W45 - BLK

Not F or R

epro duct io

Page 69

Motion Control Group - Steering Levers S/N: 4001694244 and below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 70

Motion Control Group - Steering Levers S/N: 4001694244 and below REF NO PART NO QTY DESCRIPTION

0010 5412891AA 1 WELD, SPEED CONTROL, SW35 - BLK 0060 5047199 3 SPACER, .38 x .50 x .75 0070 5101640 1 SPACER, .38 X .50 X .50, YZ 0080 5021683 3 BALL JOINT, 3/8-24 FEMALE 0110 5025394 9 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0120 5104229 2 ROD, CONTROL SYSTEM, WALK 0140 5025401 2 WASHER, 3/8" USS 0150 5104375 4 FLANGED BUSHING, 3/8IDX.63ODX.8125FL 0160 5103022 2 TRUNION, 1/2" POSTS, STAINLESS 0170 5102773 2 BUSHING, .38ID X .47 OD X .38L, FL 0180 5104374 2 SPRING,COMP,.645IDX8.00LGX.080WR,BLK E-C 0190 5025034 4 NUT, 3/8-16 HEX, YZ 0200 5104351 2 SPACER, .33 X 1.00 X .88, CZ 0210 5414411AA 2 TAB, PIVOT, W35 - BLK 0280 5025392 10 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0380 5102556AA 2 HANDLE, REVERSING - BLK 0390 5109888 2 BOLT, 3/8-16 X 1/2, 1.00 SHOULDER, CZ 0400 5102463 4 SPACER, .33 X .50 X .25, PM, CZ 0410 5104494 4 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE 0420 5104493 4 BALL JOINT 5/16-24 RH FEMALE BRONZE RACE 0430 5104159 4 ROD, 5/16-24 X 15.48, LH-RH, CZ 0440 84008514 2 SPACER (.325 X .496 X 1.000) 0450 5023212 4 NUT, 5/16-24 HEX, LH 0460 5025033 4 NUT, Hex, 5/16-24 0470 5025011X18 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ 0480 5025011X16 4 BOLT, 5/16-18 X 2" GD5 YZ 0490 5414184AA 1 WELD, W35 CONTROL PIVOT, LH - BLK 0500 5102003 4 BEARING, .375" ID X .875" OD X .341" THK 0510 5104171 2 ROD, 3/8 X 12, HEADED - CZ 0520 5025203X10 4 PIN, COTTER, 1/8 X 1-1/4 0560 84007883 2 MOUNT 0570 5025015X6 2 BOLT, 7/16-14 X 3/4, GD 5 YZ 0580 5025044 2 NUT, 7/16-14 HEX TOP LOCK 0590 5025013X8 2 BOLT, 3/8-16 X 1" GD5 CZ 0600 5025426 1 BOLT, 1/2-20 X 2-1/2, FLT 0610 5025089 2 NUT, 1/2-20 Hex Jam 0640 5025035 7 NUT, 3/8-24 HEX (SV) 0660 5025013X14 1 BOLT, 3/8-16 X 1-3/4" GD5 CZ 0680 5020095 2 GREASE FITTING, 1/4-28 Straight 0690 5414183AA 1 WELD, W35 CONTROL PIVOT, RH - BLK

-(Not illustrated) 0700 5025055X10 4 BOLT, 5/16-18 X 1-1/4 GD5 TFL, CZ 0730 5025155 2 WASHER, 5/16" SAE 0760 5025292 2 WASHER, 5/16 GRADE 9, FLAT

Not F or R

epro duct io

Page 71

Motion Control Group - Steering Levers S/N: 4001694245 and above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 72

Motion Control Group - Steering Levers S/N: 4001694245 and above REF NO PART NO QTY DESCRIPTION

0001 5025058X18 1 BOLT, 3/8-16 X 2-1/4" GD5 TFL 0060 5047199 3 SPACER, .38 x .50 x .75 0070 5101640 1 SPACER, .38 X .50 X .50, YZ 0080 5021683 3 BALL JOINT, 3/8-24 FEMALE 0110 5025394 9 NUT, 3/8 - 16 HEX NYLOCK FLANGE 0120 5104229 2 ROD, CONTROL SYSTEM, WALK 0120 5104229 2 ROD, CONTROL SYSTEM, WALK 0140 5025401 2 WASHER, 3/8" USS 0150 5104375 4 FLANGED BUSHING, 3/8IDX.63ODX.8125FL 0160 5103022 2 TRUNION, 1/2" POSTS, STAINLESS 0170 5102773 2 BUSHING, .38ID X .47 OD X .38L, FL 0180 5104374 2 SPRING,COMP,.645IDX8.00LGX.080WR,BLK E-C 0190 5025034 5 NUT, 3/8-16 HEX, YZ 0200 5104351 2 SPACER, .33 X 1.00 X .88, CZ 0210 5414411AA 2 TAB, PIVOT, W35 - BLK 0280 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 0380 5102556AA 2 HANDLE, REVERSING - BLK 0390 5109888 2 BOLT, 3/8-16 X 1/2, 1.00 SHOULDER, CZ 0400 5102463 4 SPACER, .33 X .50 X .25, PM, CZ 0410 5104494 4 BALL JOINT 5/16-24 LH FEMALE BRONZE RACE 0420 5104493 4 BALL JOINT 5/16-24 RH FEMALE BRONZE RACE 0430 5104159 2 ROD, 5/16-24 X 15.48, LH-RH, CZ 0440 84008514 2 SPACER (.325 X .496 X 1.000) 0450 5023212 2 NUT, 5/16-24 HEX, LH 0460 5025033 4 NUT, Hex, 5/16-24 0470 5025011X18 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ 0480 5025011X20 4 BOLT, 5/16-18 X 2-1/2" GD5 YZ 0490 5414184AA 1 WELD, W35 CONTROL PIVOT, LH - BLK 0500 5102003 4 BEARING, .375" ID X .875" OD X .341" THK 0510 5104171 2 ROD, 3/8 X 12, HEADED - CZ 0520 5025203X10 4 PIN, COTTER, 1/8 X 1-1/4 0560 84007883 2 MOUNT 0570 5025015X6 2 BOLT, 7/16-14 X 3/4, GD 5 YZ 0580 5025044 2 NUT, 7/16-14 HEX TOP LOCK 0590 5025013X6 2 BOLT, 3/8-16 X 3/4" GD5 CZ 0640 5025035 7 NUT, 3/8-24 HEX (SV) 0660 5025013X14 1 BOLT, 3/8-16 X 1-3/4" GD5 CZ 0680 5020095 2 GREASE FITTING, 1/4-28 Straight 0690 5414183AA 1 WELD, W35 CONTROL PIVOT, RH - BLK 0700 5025055X10 4 BOLT, 5/16-18 X 1-1/4 GD5 TFL, CZ 0730 5025155 7 WASHER, 5/16" SAE 0760 5025292 2 WASHER, 5/16 GRADE 9, FLAT 0790 5025057 6 NUT, Hex, Nylon Locking, 5/16-18 0800 5021773 4 SPRING-COMP, .438ID X 1.75LG X .137WR 0810 5109457 2 ROD, 1/2 HEX, 5/16-24 X 15.50,LH-RH, CZ 5060 5025293 1 WASHER, 3/8" GR. 9 FLAT 5080 5025292 8 WASHER, 5/16 GRADE 9, FLAT 5090 5025156 2 WASHER, 3/8 SAE 5091 5022649 1 BODY CLIP, 3/8-16 X .688" DEEP 5100 5421102AA 1 WELD, SPEED CONTROL PIVOT, W45 - BLK

Not F or R

epro duct io

Page 73

Parking Brake Group S/N: 4001694244 and Below Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 74

Parking Brake Group S/N: 4001694244 and Below REF NO PART NO QTY DESCRIPTION

1 5420288AA 1 WELD, BRAKE HANDLE, W45 - BLK 2 5025213X8 1 PIN, CLEVIS, 5/16 X 1, PLATED 3 5108660 2 ROD, PARKING BRAKE, W45 4 5101123 4 BEARING, 1/2 FLANGED, PLASTIC BALL 5 5104641 1 ROD, PARKING BRAKE, W35, UPPER 6 5414628AA 1 WELD, BRAKE ROD, W35 - BLK 7 5023323 1 CLEVIS, 5/16-24, STEEL, CLEAR ZINC 8 5104642 2 ROD, PARKING BRAKE, W35, UPPER 9 5025391 9 NUT, 1/4-20 Hex Nylock Flange 10 5010213 1 SPRING-EXT, .740 ODX2.025LGX.072WR, BLK 11 5020047 2 COLLAR, 5/16" Set 12 5020637 2 SPRING-COMP, .375IDX2.75LGX.054WR, SS 13 5104748 2 COLLAR, DOUBLE SPLIT, 7MM 14 5023216 1 NUT, Hex Jam, 5/16-24 15 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 16 5025100 2 NUT, Hex, Side Lock, 3/8-16 17 5025126 1 NUT, 1/4-20 HEX SERR. FLANGE 18 5025154 10 WASHER, 1/4 SAE 19 5025155 3 WASHER, 5/16" SAE 20 5025156 2 WASHER, 3/8 SAE 21 5025211 6 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ 22 5025220 2 BOLT, 3/8-16 x 1-1/2", 1/2" SHOULDER 23 5025510 1 GRIP, FOAM, 1/4 X 1 X 4.1 24 5025010X6 8 BOLT, 1/4"-20 X 3/4" GD5 YZ 25 5025010X18 1 BOLT, 1/4-20 X 2-1/4 GD5 CZ 26 5414630AA 1 WELD, BRAKE PIVOT, W35 - RH - BLK 27 84008396 1 PIVOTNot F

or R epro

duct io n

Page 75

Parking Brake Group S/N: 4001694245 and Above Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 76

Parking Brake Group S/N: 4001694245 and Above REF NO PART NO QTY DESCRIPTION

1 5421078AA 1 WELD, BRAKE HANDLE, W45 - BLK 2 5025213X8 1 PIN, CLEVIS, 5/16 X 1, PLATED 3 5108660 2 ROD, PARKING BRAKE, W45 4 5101123 4 BEARING, 1/2 FLANGED, PLASTIC BALL 5 5104641 1 ROD, PARKING BRAKE, W35, UPPER 6 5414628AA 1 WELD, BRAKE ROD, W35 - BLK 7 5023323 1 CLEVIS, 5/16-24, STEEL, CLEAR ZINC 8 5104642 2 ROD, PARKING BRAKE, W35, UPPER 9 5025391 9 NUT, 1/4-20 Hex Nylock Flange 10 5010213 1 SPRING-EXT, .740 ODX2.025LGX.072WR, BLK 11 5020047 2 COLLAR, 5/16" Set 12 5020637 2 SPRING-COMP, .375IDX2.75LGX.054WR, SS 13 5104748 2 COLLAR, DOUBLE SPLIT, 7MM 14 5023216 1 NUT, Hex Jam, 5/16-24 15 5025045 2 NUT, 5/16-24 HEX NYLON LOCK 16 5025100 2 NUT, Hex, Side Lock, 3/8-16 17 5025126 1 NUT, 1/4-20 HEX SERR. FLANGE 18 5025154 10 WASHER, 1/4 SAE 19 5025155 3 WASHER, 5/16" SAE 20 5025156 2 WASHER, 3/8 SAE 21 5025211 6 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ 22 5025220 2 BOLT, 3/8-16 x 1-1/2", 1/2" SHOULDER 23 84008396 1 PIVOT 24 5025010X6 8 BOLT, 1/4"-20 X 3/4" GD5 YZ 25 5025010X18 1 BOLT, 1/4-20 X 2-1/4 GD5 CZ 26 5414630AA 1 WELD, BRAKE PIVOT, W35 - RH - BLKNot F

or R epro

duct io n

Page 77

Transaxle Drive Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 78

Transaxle Drive Group REF NO PART NO QTY DESCRIPTION

1 5104193 1 BELT, A-SEC, COG TYPE, 76.2" EL ARAMID 2 5021225 1 PULLEY-IDLER-V, 4.00OB, .669ID, .88W,STL 3 5104237 1 INSERT, BEARING, .51ID X .90OD X 1.15L 4 5104286 1 SPACER, .52 X .88 X .14, HT 5 5103262 1 SPACER, IDLER ARM, 1/2, PM 6 5420337AA 1 WELD, IDLER, HYDRO, W45 - BLK 7 7078243 2 BEARING, BALL, AXLE 8 5104153 1 SPACER, .52 X .84 X 1.00, PM 9 5025017X32 1 BOLT, 1/2-13 X 4" GD5 CZ 10 5025396 1 NUT, Hex Flange, Nylock, 1/2-13 11 5104191 1 PULLEY, FLAT IDLER, 3-1/4" FLANGED 12 80003522 1 HHCS, 3/8-16 X 2.00, GR5, ZINC/CLEAR 13 5025394 3 NUT, 3/8 - 16 HEX NYLOCK FLANGE 14 5025156 1 WASHER, 3/8 SAE 15 5103676 1 SPACER, .39 X .55 X .38, PM, CZ 16 5104676 1 SPRING EXT, 1.50ODX4.75LGX.177WR, BLK 17 5025013X14 2 BOLT, 3/8-16 X 1-3/4" GD5 CZ 18 5025141X26 1 EYE BOLT,5/16-18 X3.5,2.13THRD,.55EYE,CZ 19 5025032 1 NUT, 5/16-18 HEX 20 5025392 1 NUT, 5/16-18 HEX NYLOCK FLANGE NUT 21 5104937 1 SPACER, .385"ID X .625" OD X .062" THK 22 5025401 1 WASHER, 3/8" USS 100 ----- 1 Refer to: Engine & PTO Group

Not F or R

epro duct io

Page 79

Transaxle SERVICE PARTS - 5108694 and 5108693 Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 80

Transaxle SERVICE PARTS - 5108694 and 5108693 REF NO PART NO QTY DESCRIPTION

5108694 5108694 1 TRANSAXLE, ZT3400, Z9-YMFE-SL5C-1UXX 5108693 5108693 1 TRANSAXLE, ZT3400, Z9-WMFE-SL5B-1UXX 1 ----- 1 KIT, MAIN HOUSING LH, CHARGE, CONTROL 2 ----- 1 KIT, COVER, SIDE, LH, COOLER 7 ----- 16 SCREW, HEX WASHER 11 ----- 1 PLUG EXTERNAL HEX VENT 9/16-18 13 ----- 1 TUBE, SEALANT 23 ----- 1 FILTER, SPIN-ON 2.6 X 3.0 30 ----- 1 SEAL, LIP .375 X .75 X .25 31 ----- 1 BYPASS RETAINING RING 1 32 ----- 1 ROD, BYPASS .375 X 2.88 33 ----- 1 BYPASS RETAINING RING 2 34 ----- 1 ARM, BYPASS 35 ----- 1 RING, RETAINING .375 EXTERNAL 40 ----- 1 SWASHPLATE, TRUNNION 41 ----- 1 SEAL, LIP 10 X 32 X 7 42 ----- 1 STUD, SHORT 5/16-24 48 ----- 1 SPACER 55 1730272 1 SPACER (50951) 56 5023414 1 Lip Seal 17 x 40 x 7 PTC 57 5023415 1 Spacer 60 ----- 1 BEARING, THRUST 35 x 62 x 18 64 ----- 1 KIT, 16cc CYLINDER BLOCK ASSEMBLY STEAM TREAT 65 ----- 1 BEARING, THRUST PLASTIC CAGE 69 ----- 1 KIT, BLOCK 7 PISTON 70 ----- 1 WASHER, .63 X 1.00 X .05 FLAT 71 1706130 1 RING-SNAP (44145) 72 ----- 1 GEAR, 14T (STEEL) 73 ----- 1 SHAFT, MOTOR 74 ----- 1 WASHER, .71 X 1.16 X .04 FLAT 80 ----- 2 WASHER, .51 X 1.00 X .03 FLAT 81 ----- 1 GEAR, 45T 82 ----- 1 GEAR, 11T (STEEL) 83 ----- 1 PIN, JACKSHAFT 90 ----- 1 RING, RETAINING 2.25 INTERNAL 91 ----- 1 GEAR, 54T FORGED 92 ----- 1 SPACER, .750 X 1.320 X .257 93 ----- 1 KIT, BEARING 94 5104822X2 1 SHAFT, AXLE, ZT-3400, 53528 95 ----- 1 BEARING, BALL, AXLE INBOARD 96 5103589X1 1 KIT, SEAL, AXLE - HG# 53699 97 5103382 1 HUB, ASM, TRANS 5101188/89 & 5102154/55 102 5103750 1 BRAKE ARM, ZT3400 103 5104055 1 E-CLIP, BRAKE ARM, ZT3100 & ZT3400 106 ----- 1 KIT, FILTER GUARD 130 ----- 2 TUBE, CHARGE TRIPLE O-RING 156 5104822X3 1 CAP, AXLE, ZT-3400, 53501 157 ----- 1 KIT, GEROTOR SEAL 158 ----- 1 MAGNET 164 ----- 1 WASHER, 1.355 x 2.035 x .021 FLAT 189 5108072X10 1 ASSEMBLY, AUX COOLER PORT (#55672)

Not F or R

epro duct io

Page 81

Transaxle SERVICE PARTS - 5108694 and 5108693 Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 82

Transaxle SERVICE PARTS - 5108694 and 5108693 REF NO PART NO QTY DESCRIPTION

190 ----- 2 SCREW, PAN HEAD, 1/4-20 X .625 193 ----- 1 PLUG, 3/4-16 200 5103589X2 1 KIT, SEAL - HG# 73239 201 ----- 1 KIT, CENTER SECTION, LH CHARGE 202 ----- 1 KIT, CHARGE RELIEF 203 5101026X12 1 KIT, CHARGE PUMP, ZT2800, ZT3100 207 5104580X1 1 FAN & PULLEY KIT, ZT3400'S, STAND-ON 209 ----- 1 KIT, HUB PULLER 210 ----- 1 KIT, INPUT SHAFT 211 ----- 1 KIT, CONTROL ARM 215 ----- 1 KIT, OUTBOARD, RH ROT B / LH ROT A

Not F or R

epro duct io

Page 83

Wheel and Tire Group Mfg. No: 5901893Note: Unless noted otherwise, use the standard torque specifications

Not F or

Repro duct io

Page 84

Wheel and Tire Group REF NO PART NO QTY DESCRIPTION

0010 5109044 2 TIRE ASM, 20 X 8-10, TURF MASTER, BLK 0010-10 5101293X1 2 TIRE, 20 X 8.00-10 NHS, 4 PR TURF MASTER

-(One per tire) 0010-20 ----- 2 WHEEL RIM

-(One per tire) 0020 ----- 10 LUG NUT, Black

-(Originally Black Lug nut - Replacement 5020601SM is silver in color). 0020 5020601SM 10 NUT, 1/2-20, FOR WHEEL BOLT SILVER

-(Replacement 5020601SM is silver in color). 0030 5109032 2 TIRE ASM, 11 X 4 -5, FF / CB, BLK 0030-10 5101418X1 2 BEARING, CASTER WHEEL, 11 X 4.0 - 5 BEAD LOCK (SV)

-(One per tire) 0030-20 5021043 4 RETAINER, BEARING (TWO PER TIRE)(SV)

-(Two per tire) 0040 5025017X56 2 BOLT, HEX, 1/2-13 X 7, GD 8, YZ 0050 5025158 2 WASHER, 1/2 SAE 0060 5025396 2 NUT, Hex Flange, Nylock, 1/2-13 0070 5045996 2 AXLE, Front Caster

Not F or R

epro duct io

Page 85

in/lbs ft/lbs

Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance 20%)

Property Class

Class 8.8 Class 10.9 Class 12.9

Size Of Hardware Nm. Nm. Nm. Nm.

M3 1.28 2.90 5.75

9.9 16.5

24 48 83

132 200 275 390 530 375 995

1350 1830 2360 3050

13.44 1.80 4.10 8.10

14 23 34 67

117 185 285 390 550 745 960

1400 1900 2580 3310 4290

19.2 22.92 2.15 M4 30.72 43.44 52.56 4.95 M5 60.96 5.97 7.15

16.5 9.7

M6 7.3 10.3 12.1 M7 12.1 16.9 19.9 27 M8 17.7 25 29 40 M10 35 50 59 81 M12 61 86.2 103 140 M14 101 136 162 220 M16 147 210 250 340 M18 202 287 346 470 M20 290 405 486 660 M22 390 559 656 890 M24 497 708 840 1140 M27 733 1032 1239 1680 M30 995 1401 1681 2280 M33 1349 1902 2278 3090 M36 1740 2441

3798 2935 3980

M39 2249 3163

Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance 20%)

Hardware Grade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Ofin/lbs ft/lbs

in/lbs ft/lbs

in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 29 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES 1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5

torques. b. for flange whizlock nuts and screws - use 135% of

grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

No Marks

The guides and ruler furnished below are designed to help you select the appropriate hardware.

8.8 10.9 12.9

Class 5.6

5.6

5150

13.44 1.28 5.88

26.4 2.50 44.64 4.3

5.2 7.1 7.7 10.5 15 21

988 1340 759 1030 590 800 435 590 320 435 217 295 169 230 126 171

89 121 64 88 42 58 26 36

.56

Thread Diameter (mm)

Screw, 1/2- 16 x 2

Body Diameter

Diameter

Inside Diameter (in)

Nut, 1/2-16 0

1/4 3/41/2 21 1/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4

90 10070 8050 6030 400 10 20

Thread Diameter (mm)

Nut, M8 Screw, M8- 1.25 x 25

Distance between threads (mm)

Body Length (in)

Body Length (mm)

3/8 Bolt or Nut Wrench9/16

5/16 Bolt or Nut Wrench1/2

1/4 Bolt or Nut Wrench7/16

1/2 Bolt or Nut Wrench3/4

7/16 Bolt or Nut Wrench (Bolt)5/8 Wrench (Nut)11/16

in/lbs

Threads per inch

Body Length

Body

When a washer or nut is identified as 1/2 (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).

When bolt or capscrew is identified as 1/2 - 16 x 2 (M8 - 1.25 x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final number is the body length of

Related manuals for Ferris FW45 CC Series 5901893 Mower Parts Manual

Ferris 5600498 Bagger Parts Manual

Ferris ManualFerris Bagger ManualFerris 5600498 ManualFerris Bagger Parts Manual

Pages 7

Year 2023

Language(s)

Ferris 5600746 Hopper Parts Manual

Ferris ManualFerris Hopper ManualFerris 5600746 ManualFerris Hopper Parts Manual

Pages 37

Year 2023

Language(s)

Ferris 5106274 Pathfinder Parts Manual

Ferris ManualFerris Pathfinder ManualFerris 5106274 ManualFerris Pathfinder Parts Manual

Pages 7

Year 2023

Language(s)

Ferris 300S Series 5902142 Mower Parts Manual

Ferris ManualFerris Mower ManualFerris 300S Series ManualFerris 5902142 ManualFerris Mower Parts Manual

Pages 43

Year 2023

Language(s)

Ferris 300S Series 5902143 Mower Parts Manual

Ferris ManualFerris Mower ManualFerris 300S Series ManualFerris 5902143 ManualFerris Mower Parts Manual

Pages 47

Year 2023

Language(s)

Ferris 300S Series 5902144 Mower Parts Manual

Ferris ManualFerris Mower ManualFerris 300S Series ManualFerris 5902144 ManualFerris Mower Parts Manual

Pages 45

Year 2023

Language(s)

Ferris 400S Series 5901813 Mower Parts Manual

Ferris ManualFerris Mower ManualFerris 400S Series ManualFerris 5901813 ManualFerris Mower Parts Manual

Pages 71

Year 2023

Language(s)

Ferris 1000Z Series 5901002 Mower Parts Manual

Ferris ManualFerris Mower ManualFerris 1000Z Series ManualFerris 5901002 ManualFerris Mower Parts Manual

Pages 59

Year 2021

Language(s)

Manualsnet FAQs

If you want to find out how the FW45 CC Series Ferris works, you can view and download the Ferris FW45 CC Series 5901893 Mower Parts Manual on the Manualsnet website.

Yes, we have the Parts Manual for Ferris FW45 CC Series as well as other Ferris manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Parts Manual should include all the details that are needed to use a Ferris FW45 CC Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Ferris FW45 CC Series 5901893 Mower Parts Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Ferris FW45 CC Series 5901893 Mower Parts Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Ferris FW45 CC Series 5901893 Mower Parts Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Ferris FW45 CC Series 5901893 Mower Parts Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Ferris FW45 CC Series 5901893 Mower Parts Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.

Free Ferris FW45 CC Series 5901893 Parts Manual PDF | Manualsnet (2024)

Summary of Content for Ferris FW45 CC Series 5901893 Mower Parts Manual PDF

Related manuals for Ferris FW45 CC Series 5901893 Mower Parts Manual

Manualsnet FAQs

References