Cub Cadet Parts | Same Day Shipping (2024)

Cub Cadet Fuel Tank Assembly W/Fuel Lines Incl. 29

PartSelect Number PS11812933

Manufacturer Part Number 753-06797

The fuel tank assembly is responsible for storing and supplying fuel to the engine in lawn and outdoor power equipment. It includes the tank, fuel cap, and fuel lines. The fuel tank assembly will fail if the tank develops cracks or leaks, or if the fuel lines can become clogged. When the fuel tank assembly fails, you will notice fuel leakage, restricted fuel supply, stalling, difficulties starting and overall lower performance. Before beginning any repairs, first drain any remaining fuel from the tank for your safety. Disconnect the fuel lines from the tank and remove the fuel tank from the equipment. Position the new tank on to the mounting holes and secure it in place. Connect the fuel lines to the engine and vent to complete your repair.

Cub Cadet Grass Catcher Frame

PartSelect Number PS9988561

Manufacturer Part Number 647-04271-0637

Cub Cadet Shear Pin, .25

PartSelect Number PS9110822

Manufacturer Part Number 738-04124A

This individually sold shear pin is an OEM replacement that is most typically used in snowblowers but can also be used within snowblower attachments for lawn tractors. Its main uses are connecting the auger and auger shaft, which are the rotating blades, and to protect more valuable components such as the transmission.If the snow is causing excessive force or there is a jam within the auger and connected housing,it will cause the shear pin to snap, effectively stopping the rotation of the auger, while the auger shaft and gears will continue turning. If the shear pin snaps, snow will simply build up on the outside of the auger housing, since the auger will no longer spin. This shear pin has a .25-inch diameter, and 1.5-inch length and is sold individually. Most augers have a pin on each side, so you may need to purchase more than one, and it is also recommended that you carry spare pins in case of a future breakage.

Cub Cadet Rear Axle Assembly

PartSelect Number PS10023414

Manufacturer Part Number 911-04144B

Axle assembly attaches the rear wheels to the mower and allows the wheels to rotate.This part replaces part numbers 911-04144 and 911-04144A.Wear work gloves to protect your hands when installing this part.

Cub Cadet Air Filter

PartSelect Number PS9117898

Manufacturer Part Number 753-05996

Cub Cadet 13" Articulating Tine

PartSelect Number PS10007424

Manufacturer Part Number 742-0305A-0637

Cub Cadet Element- Air Cleaner

PartSelect Number PS9903219

Manufacturer Part Number 17211-ZL8-023

This air cleaner element, also known as an air filter, is found in your lawn equipment. Typically housed in a rectangular container, it is located near the air intake area or carburetor of your machine. It keeps dust, dirt, and debris from entering the combustion chamber. If it is clogged, the restricted airflow will make the engine misfire or run poorly, and potentially cause an engine failure. To replace the element, you will need to remove its housing cover by unscrewing or unclipping it. This OEM-certified filter is sold individually.

Cub Cadet Bolt- Stud - H=42.5mm

PartSelect Number PS10021937

Manufacturer Part Number 90043-ZL8-000

Cub Cadet Lawn Mower Zone Control Cable

PartSelect Number PS9180334

Manufacturer Part Number 946-1130

This zone control cable is for lawn mowers.Zone control cable stops the engine when you let go of the handle.Wear work gloves to protect your hands during this repair.

Cub Cadet Carriage Bolt, 5/16-18 x .75

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.